System Settings - Crosstour CR300 Manual Del Usuario

Date stamp: on/off. Default value: on.
G-sensor: off/ Low/ Medium/ High. Default value: Medium.
The cam automatically locks video that is being recorded once it detects shaking
or collision. Files that are locked won't be overwritten/ covered.

System Settings

After being powered on, it enters the video mode and automatically starts record-
ing. Short press Menu Button to switch to video recording settings. Short press
Menu Button again to switch to system setting. The screen displays the settings
such as: Date/time, Auto Power off, Screensavers, Beep sound, Language,
Frequency, License plate stamp, Format, Default setting, Version.
Date and time: You can set the display order of date and time, such as Y/M/D.
Press OK to enter, press Up or Down to change. After changing each time, press
OK button to switch to the next item. After all items are changed, press Menu
Button to save and exit. (After restoring the factory settings, the date becomes the
factory date)
Auto power off: Off / one minute / three minutes / five minutes. Default value:
three minutes.
Note: If there is no operation on the cam within the set time, the cam will
automatically turn itself off when the cam is not recording.
Screensavers: Off / one minute / three minutes / five minutes. Default value: one
minute
Note: If there is no operation on the cam within the set time, the screen will go
black to save power. But the cam still keeps recording.
Beep sound: Turn on / off sound of operation on the camera. On /off. Default
value: on.
8