Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Refer to the installation diagrams below as you perform these steps.
Note: Make sure that the power to the computer or KVM switch being connected to the console is powered off before proceeding with the installation.
1
Connect the Black VGA connector on the included cable kit to the VGA port on the back of the console.
2
Connect the Blue VGA connector on the other side of the cable kit to the VGA port on the back of your computer or KVM switch.
3
Connect the PS/2 keyboard and mouse connectors, on the same side of the cable kit as the Blue VGA connector, to the PS/2 keyboard
and mouse ports on the back of your computer or KVM switch. If you have a computer or KVM switch with USB connectors, connect the
PS/2 keyboard and mouse connectors on the cable kit to the connectors on the included PS/2 to USB adapter, and then plug the USB
connector on the adapter into an available USB port on your computer or KVM switch.
Note: Although KVM switches will contain two USB console ports for keyboard and mouse, you can plug the single USB connector on the adapter into
either port.
4
C onnect the power cord to the socket on the back of the console, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution
Unit (PDU), or Uninterruptible Power Supply (UPS).
5
Power on the connected computer or KVM switch.
6
Turn on the LCD screen by pressing the On/Off button on the control panel of the built-in monitor.
Computer Installation
Note: The diagram below shows the connection of a computer with PS/2 keyboard and mouse ports. To connect to a USB computer, use the PS/2 to USB
adapter provided with the console.
4
Computer Installation
KVM Installation
Note: The diagram below shows the connection of a B042-016 KVM switch, using PS/2 connections. The console ports of different model KVM switches may
be located elsewhere on the unit. To connect to the USB console port on a KVM switch, use the PS/2 to USB adapter provided with the console.
4
KVM Installation
Specifications
Function
Console
Connectors
Cable Kit
Power
LCD Resolution
Environment
Housing
Weight
Dimensions (L x W x H)
All manuals and user guides at all-guides.com
1
1
Specification
1 x HD-15 female
1 x HD-15 male to 1 x HD-15 male, 2 x PS/2 male
1 x IEC-60320-C14 AC socket (100-240V~, 50/60Hz)
1280 x 1024; DDC2B
Operating Temperature: 32°- 104° F
Storage Temperature: -4°- 140° F
Humidity: 0 - 80% RH Noncondensing
Metal
36 pounds
28 x 19 x 1.7 inches
3
2
3
2
3
Tabla de contenido
