Tools Required - Humanscale QuickStand Eco Instrucciones De Montaje

IMPORTANT SAFETY INSTRUCTIONS
Tools included for installation
• Use both hands on each side of worksurface when raising and lowering
• Do not raise or lower with open beverages on worksurface
2.5mm hex key
• Avoid any sudden or hard impact on worksurface
6mm hex key
Phillips head screw driver
• Total weight of the monitors and items on work surface should not exceed 30lbs.

Tools Required

①
Phillips head screwdriver
Parts Included
①
Main Post
i. laptop version
②
Work surface
⑨
6mm hex key
⑬
M6x6mm (x6)
(only with version 1.0)
⑯
M5x17mm (x2)
(only with crossbar)
Tools included for installation
2.5mm hex key
6mm hex key
Phillips head screw driver
ii. single monitor version
③
i. version 1.0
Base
⑩
2.5mm hex key
OR
M5x3mm (x2)
(only with version 1.5)
⑰
M4x18mm (x4)
(VESA hardware kit)
Basic
④
Upper cap
(laptop only)
⑤
+
Upper cover
⑥
Lower cover
iii. dual monitors version
⑦
VESA plate (1or2)
⑧
ii. version 1.5
Crossbar
(dual monitor configuration only)
⑪
3mm hex key
(only with crossbar)
⑭
Screw cap (x2)
(only with version 1.5)
⑱
M4x8mm (x4)
(VESA hardware kit)
Single monitor
Basic
+
⑫
M8x21mm (x2)
⑮
M6x17mm
(only with crossbar)
3