very minor. The following table contains various tips:
Description
• Ensure the mains cable is connected securely at both ends.
• Use the remote control near the unit.
• Point the remote control at the remote sensor on the unit.
• Replace the battery in the remote control with a new one.
• Remove any obstacles between the remote control and the unit.
• The unit may freeze up during use. Switch the unit off and then on again at the mains socket
to reset the unit.
• Weak signal. Use the Manual Tune function.
• Set the clock correctly. Switch on the timer.
• Power has been interrupted or the power cord has been disconnected.
• Reset the clock/timer.
• iPod/iPhone/iPad may not be docked properly or installed properly.
Remove your iPhone/iPod from the dock and check for obstructions on the connectors in the
dock and on your iPod/iPhone/iPad.
• Make sure that your iPod/iPhone/iPad is working properly before docking. Please refer to your
iPod/iPhone/iPad manual for details.
• Make sure the iPod/iPhone/iPad is connected properly.
• Standby mode may be activated; press the button again.
• Make sure the iPod/iPhone/iPad is switched on.
• Vibrations may have caused the iPod/iPhone/iPad to come loose from the docking station.
• Check the corresponding DOCK mode is selected.
• Reinsert iPod/iPhone/iPad.
• While the iPhone is playing the music throught the docking, there may be a chance that the
iPhone may not be under a good receiption mode to get the incoming call signal.
the unit from the mains socket and reconnect it again.
without prior notice.
All manuals and user guides at all-guides.com
21