Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ATTACHING THE FAN MOTOR
ASSEMBLY TO THE HANGER BRACKET
Step 1. Remove one of the four screws on the hanger bracket and
loosen, but do not remove, the other three screws.
Step 2. Remove the motor assembly from the J hook.
Hanger bracket
Step 3. Lift and place the key holes on the mounting plate over the three
J hook
screws previously loosened on the hanger bracket and turn the
mounting plate until it locks in place and no longer turns.
Step 4. Secure by tightening the three screws previously loosened and
the screw previously removed.
Mounting plate
Screw
Fan motor assemby
Fig. 10
Tabla de contenido
