Call Forward; Call Transfer - iPECS LIP-8004D Guía Rápida De Usuario

Call Hold:
• Press the HOLD/SAVE button while on a call.
Retrieve Call from Hold:
• Press the flashing CO button or Loop button.
Conference:
A Conference flex button should be programmed (refer to User Guide for full instructions).
• Place first call.
• Press Conf button.
• Place second call.
• Press Conf button twice.

Call Forward:

• Lift handset.
Dial 54 or 554 or *554 (Call Forward Code, depending on System).
• Dial the type of forward code (0-5).
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer, 5=Incoming Co offnet (attendant only),
0=remote
• For forward code 1-4, dial destination number.
• For forward code 5, press CO/CO-Group button, and dial Speed number.
• For forward code 0, enter the password of the forwarded station, and dial forward code (1-4)
1=Unconditional, 2=Busy, 3=No Answer, 4=Busy/No Answer- Dial the destination number.

Call Transfer:

• While on an active call, press TRANS/PGM.
• Place call to the transfer destination.
• Remain on the line to announce the call and/or hang-up to complete the transfer.
Using Last Number Redial (LNR):
• Lift handset.
Dial 52 or 552 or *552 (LNR Code, depending on System).
OR
• Press SPEED button and dial *.
• Press VOL
button to select from the last 10 numbers dialed.
• Press Hold/SAVE to place the call.
3
STG