Using Your Dehumidifier; Preset Modes - Whirlpool WHAD303AW Manual De Uso Y Cuidado

USING YOUR DEHUMIDIFIER

Turning the Dehumidifier on or off
When you first plug in the dehumidifier, it will beep
once and the display will show the current
temperature and relative humidity level.
Press POWER to turn the dehumidifier on or off.
IMPORTANT:
When first operating the dehumidifier, run it in Continuous
■
mode for 24 hours.
If you turn off the dehumidifier, wait at least 3 minutes before
■
turning it back on.
Do not try to operate your dehumidifier if the temperature in
■
the room is below 41°F (5°C) or above 95°F (35°C).
NOTE: In the event of a power failure, your dehumidifier will
operate at the previous settings when the power is restored.
Selecting the Fan Speed
The Fan Speed has 3 settings:
Low
■
Medium
■
High
■
Press the FAN SPEED button until the indicator light
for the desired setting is lit.
Selecting the Humidity Level
Press the up or down arrow button to increase
or decrease the humidity setting. The relative
humidity level can be adjusted between 35%
and 80%.
Each press of the button will change the desired
room humidity by 5%. The unit will cycle on and
off to maintain the humidity level chosen on the
digital display.
To operate the dehumidifier continuously
regardless of the room humidity, press the Mode button until
you see "CO" on the digital display. This will enable continuous
operation and the "Continuous" indicator will light up on the
control panel.
6
Using the Timer
Auto Shut-Off
You can set the dehumidifier to shut off automatically
after a set amount of time, up to 24 hours.
To set Auto Shut-Off:
1. With the dehumidifier on, press TIMER.
2. Press the up or down arrow button to increase
or decrease the timer in 30 min increments
(0.5 hours) up to 10 hours. After 10 hours,
each press of the button will increase the
timer in 1-hour increments up to 24 hours.
3. After the set time, the dehumidfier will turn off
automatically.
Auto Start
You can set the timer to start the dehumidfier automatically after
a set amount of time, up to 24 hours.
1. With the dehumidfier off, press TIMER.
2. Press the up or down arrow button to increase or decrease
the timer in 30 min increments (0.5 hours) up to 10 hours.
After 10 hours, each press of the button will increase the timer
in 1 hour increments up to 24 hours.
3. After the set time, the dehumidfier will start automatically with
the last humidity and fan settings used.

Preset Modes

Preset humidity level settings allow the user to
easily move the dehumidifier from room to room.
For optimum performance, select the corresponding
mode for the location in which the dehumifier is
operating.
Press the MODE button to choose from Bedroom,
Living Room, or Basement.
Child Lock Mode
Locking the control panel prevents someone from
accidentally changing the settings.
1. To lock the control panel, press and hold TIMER for
3 seconds. The Lock indicator will light up.
2. To unlock the control panel, press and hold TIMER for
3 seconds. The Lock indicator will turn off.