Idiomas disponibles
Idiomas disponibles
General Information
This hydraulic transmission jack can be
used when assembling and
disassembling parts which need to be
lifted, descended or transported.
This jack is a compact construction
movable hydraulic jack, light in weight,
with long lifting range and fast lifting
Specification
Max. Capacity: 500 Kg
Min height of saddle: 1100 mm
Max height of saddle: 1900 mm
Net weight: 32 Kg
Dimensions: 1120 x 230 x 280 mm
ASSEMBLY INSTRUCTIONS
1. Attach two legs (1) to the base using
bolts (2) and lock washers (3).
2. Fit four casters (4) to the legs (1)
using nuts (5) and lock washers (6).
3. Put the adapter (7) onto the top of
the piston rod (8) and slip it down.
4. Loosen and remove the vent screw
(9), in the upper part of the jacket
pipe, for venting the system and then
reinstall vent screw directly.
WARNING
Study, understand and follow all printed
materials provided with/on this device
before use. Do not exceed rated
capacity. Use only on hard, level,
seamless surface.
Use of this jack is limited to the removal,
installation and transportation of
transmissions, transfer cases and
transaxles.
Adequately support the vehicle before starting repairs.
Because of potential hazards associated with this type of equipment, no alterations shall be made to
the product
Failure to read these manual may result in personal injury and/or property damage..
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
Transmission Jack, 500 kg
.
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
9232
L
d . l h
a t s
w
s
@
o f n i
: l i
