Installing The Conversion Software; System Requirements; Installing Audiolava; Preparing The Cassette Digitizer - Silvercrest SKD 1000 A3 Manual Del Usuario E Información De Servicio

Installing the Conversion Software

System Requirements

With the supplied AudioLava conversion software you can digitize your analog recordings and
at the same time filter out hissing, sound imperfections, crackling and other background noise,
and add Hall effects etc. Before installing the software, make sure that your computer fulfils the
following minimum requirements:

Pentium or compatible processor, 800 MHz or higher

Minimum of 256 MB RAM

Graphics board with a colour depth of at least 16 bits

A Windows-compatible sound board

Operating system: Windows 7/8, Windows Vista or Windows XP

DirectX 8.0 or higher.

Installing AudioLava

The software is provided on the supplied CD.
1. Insert the supplied CD into the CD or DVD drive of your computer. The software should
install and launch automatically; if it doesn't, double-click on the "CD_Start.exe" file in the
main folder on the CD.
2. Then follow the on-screen instructions to install the software. If you are then asked whether
the computer should be restarted, click on Yes.

Preparing the Cassette Digitizer

You can operate the device using the supplied AA-sized (Mignon) batteries, via the USB cable
connected to a PC, or by using an optional mains adapter (not supplied). The mains adapter
must have a compatible DC output plug and must supply an operating voltage of 3V. Mains
adapter output polarity:
66
Cassette Digitizer SilverCrest SKD 1000 A3
English