Temperature Control Probe - Duronic GP20 Manual De Instrucciones

To prevent Plasticize from migrating to the finish of the counter top or table top
or other furniture, place NON-PLASTIC coasters or place mats between the
appliance and the finish of the counter top or table top.
Failure to do so may cause the finish to darken; permanent blemishes may
occur or stains can appear.
This appliance requires little maintenance.
It contains no user serviceable parts.
Do not try to repair it yourself.
Any servicing requiring disassembly other than cleaning must be performed by
a qualified appliance repair technician.
1. The temperature control probe is the nerve center and brain of the
electric Griddle. Treat it carefully. Dropping or banging it could
change its calibration and make the temperature settings inaccurate.
2. Rotate the dial to select the temperature as called for in the recipe.
3. The indicator light on the temperature control probe
will illuminate as soon as the dial is rotated.
The light will go out once the selected temperature has been reached.
4. Allow the Griddle to cool before removing the temperature control probe.
5. To clean the temperature control probe, simply wipe down with a soft,
damp cloth. Make sure you dry it thoroughly before using again.
Plasticize Warning
User Maintenence Instructions
Specifications
Operating Voltage : 220-240V~ 50/60Hz
Power: 2000W

Temperature Control Probe

6