Rotating Grill; Smoke Exit; Door Handle; Fitting The Frame - Bronpi BRISTOL Manual De Instrucciones

2.3

ROTATING GRILL

The grid is composed of two parts: cast iron grill and stainless steel handle. In order to install the grill, follow the next steps.
2.4

SMOKE EXIT

The collar for the flue exit is made in cast iron. To remove it, unscrew the 4 screws around the collar.
2.5

DOOR HANDLE

*** Only model Bristol.
The handle of the equipment is a removable type "cold handle". It needs to be fitted on the door only when you need to open & close it. To
use the handle, slide down over the "triangular" locating plate and then turn right/left.
2.6

FITTING THE FRAME

In order to remove the 3 sided frame, unscrew the 4 screws in the sides of the frame (2 in right side and 2 in the left side)
If a special frame is going to be fitted, first, remove the standard frame. After this, the new frame can be fitted by using the existing screw
holes.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS 17 BRISTOL AND BRISTOL-V