Callaway MICRO Manual Del Usuario página 11

TROUBLESHOOTING
Rangefinder is consistently providing inaccurate measurements.
• Make sure the device is set to the desired unit of measure
(Yards or Meters).
• Weak battery signal can affect the accuracy of the device. If the
Low Battery Indicator is present on the LCD display, replace
the battery.
• Make sure there isn't anything obstructing your view such as
leaves, branches, your finger, etc.
Measurment is not displayed
• If using Prism Mode, a yardage will only be displayed when
laser is fired at a flagstick with a built-in reflector.
• Weak battery signal can affect the accuracy of the device. If the
Low Battery Indicator is present on the LCD display, replace
the battery.
• Make sure there isn't anything obstructing your view such as
leaves, branches, your fingers, etc.
When should P.A.T Mode be used?
• When measuring the distance to smaller targets such as
a flagstick.
• When scanning the landscape to measure distances to a
smaller target such as a flagstick and there are trees or other
objects in the background.
When should Prism Mode be used?
• Only when measuring the distance to a flagstick with a
built in reflector.
10 TROUBLESHOOTING