Carl F. Bucherer PATRAVI EVOTEC DAYDATE Instrucciones página 3

Patravi evotec daydate
Legend
Big date
crown
Position 1: Winding
1 2 3
Position 2: set date / day of the week
Position 3: set time
small seconds
Day of the week
En 6
Your watch
the mechanism of the Patravi Evotec DayDate is
based on the innovative cFB A1000 manufacturer
calibre with a peripheral rotor. Measuring 43.75 ×
44.5 mm, the cushion-shaped case of the Patravi
Evotec DayDate has generous measurements.
It includes a clearly set-up dial on which there is
room for the day indicator and a big date, in
addition to the small seconds.
Technical Data
Automatic movement cFB A1001
Depth of the movement 6.3 mm
Diameter of the movement 32 mm
number of jewel bearings 33
Water resistance 50 m (5 atm)
(see the chapter on "Water resistance")
Start the watch Set time
the movement is wound by the motion of the In order for the date to properly move at midnight,
wrist when worn. When not worn, the watch stops the hour hand must intentionally be set to a.m. or
after approximately 55 hours and has to be wound p.m. based on the current time.
manually.
1 rotating the crown in the 1
counter clockwise direction
will automatically release it
to position 1.
2 Manually wind the move- 2
ment by rotating the crown
at least 30 times in the
clockwise direction.
3
Pull the crown until it is in
position 3. the second hand
does not move.
rotate the crown clockwise
until the date changes. then
deliberately set the current
time either a.m. or p.m.
Push the crown back into
position 1. the second hand
is back in motion.
7 En