Cleaning And Maintenance - SEA SUNSET BAT Guia De Inicio Rapido

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888

CLEANING AND MAINTENANCE

Cleaning and maintenance of this unit must be carried out at 6 monthly intervals by authorised, qualified personnel.
During routine maintenance the following checks should be made: Correct alignment, sealing, cleanliness of the lenses and internal components. Any remedial
work should be carried out as required.
DECOMMISSIONING
If the 23102106 photocell is to be taken out of service, this work must only be undertaken by authorised, qualified personnel.
LIMIT OF GUARANTEE
The 23102106 photocell is guaranteed for a period of 24 months. The guarantee period starts from the date stamp printed on the product. The guarantee will be
void if the photocells have been incorrectly installed, not used for the purpose intended, tampered with or modified in any way. The validity of this guarantee only
extends to the original purchaser.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY IMPROPER USE OF THIS
PRODUCT.
SEA reserves the right to do changes or variations that may be necessary to its products with no obligation to notice.
Rx 57 / Tx
Fig. 1
Fig. 3 RX
+
+
Fig. 6
Cod. 67410887
®
Connector Photovoltaic panel
Rx 33/ Tx
+
Fig. 4 TX
+
+
English
42
42
-
+
Fig. 2
1) Jumper Photocell transmitter battery
2) Photocell receiver
3) Photovoltaic panel
4) Mechanical security edge
Rev. 01 - 04/2010
Security edge connection
not balanced
1 2 3 4
R 8,2K
NC
Security edge connection
balanced
1 2 3 4
Jumper
NC R 8,2K
3
1
2
4
Fig. 7
1 2 3 4 5 6
0 0 +12 +24 +12 +24
Contact for
safety edge
or photocell on
the board
Fig. 2 bis
Fig. 5
Fig. 8
4