Tabla de contenido
2.5. Connection Diagram
Only to be used if the car radio is connected to an amplifier
or if the car radio does not have an ISO connection and
there are difficulties identifying the cables to be used for
the connections.
Connect the yellow cable to the car radio muting input and
use the speaker wires (position 2 connector A) linked to an
external speaker. Also connector B should be connected
back to the car radio.
Main Unit
T-Cable
Microphone
Remote control
Power supply cable
Replaceable Fuse2. 5A
Dia. 5x20mm.
A-A
Figure 3 Connection
3. MAJOR FEATURES
3.1. Supports autopairing.
3.2. Super echo cancellation and background noise reduction.
3.3. The handsfree in full duplex works with the front speakers of the car.
3.4. Auto Radio muting function.
3
All manuals and user guides at all-guides.com
English
Muting (Yellow)
Car Radio (not included)
ISO Cable
ISO Connector (A)
B-B
ISO Connector (B)
A-A
Car Spekar
(not included)
English
4. SPECIFICATIONS
4.1. Operating Voltage: 12 vDC.
4.2. Microphone sensibility: -56db+/-2db
4.3. Average audio output: Max. 4W (4 )
4.4. Power consumption: 1200 mA (Max)
4.5. Operating temperature: -10 /50 degrees
4.6. Storage temperature: -20 /70 degrees
4.7. T cable with ISO connectors
The wiring supplied with the kit is used to connect the main unit is series between
the car radio and the car's speaker, and to get the power supply for main unit.
4.8. External microphone
The external microphone is supplied with a 3.5 mts. long cable, enabling it to be
installed in any vehicle. We recommend to install it near the rear-view mirror,
allowing the driver to speak naturally at the right distance. Please ensure that the
air inlets (heating. air conditioning) do not blow in the direction of the microphone.
If unavoidable, please turn down the heating/ air conditioning during the
conversation.
5. TROUBLESHOOTING
5.1. The caller cannot hear your voice – Ensure that the microphone connector
is properly connected.
5.2. No power – Check whether the fuse is broken down.
5.3. Caller ID no display – Ensure that the connection cable is properly connected.
5.4. The caller complains of an echo during the conversation – Turn down the
volume.
IMPORTANT!
CONNECT THE YELLOW (MUTING) WIRE LEAD TO THE CAR RADIO'S
MUTING SOCKET.
If you find it difficult to find this, please refer to the manual of car radio, or ask
you car supplier or radio supplier.
When you find the correct cable, the car radio will switch to Muting Mode.
4
Tabla de contenido
