Instructions
Rustic Mini Kinetic Wind Spinner
Please read all instructions before pursuing assembly or usage. Carefully check all packaging materials before
discarding. Do not assemble this product if there are missing pieces. Contact customer support provided on
this manual for replacement parts.
Hardware List
Base Spike
A
Pole
B
Threaded Arm Tube
C
Large Rustic Spinner
D
Caps
E
Hanging Hook
F
C
E
D
B
B
A
Use caution when handling the metal spinner. Each of the petals are thin and lightweight for optimal spin. The edges
may be slightly sharp. If the spinner arrives slightly bent at the tips or other areas, they can be reshaped after assembly.
Make sure to remove and dissemble wind spinner during inclement weather. Do not use wind spinner in extreme
weather conditions. Serious injuries and damages may occur.
AFTER SALES SUPPORT
1
2
1
2
2
1
A
Standing
E
D
E
D
CAUTION
[email protected] 1800 599 8898
C
B
D
STANDING SPINNER ASSEMBLY & OPERATION
Hanging
1.
2.
3.
F
4.
HANGING SPINNER ASSEMBLY & OPERATION
C
1.
E
2.
D
3.
4.
ADJUSTING THE SPINNER
•
•
•
MAINTENANCE
•
MODEL: 33868-20
E
Mount one of each large spinner (D) onto either side of
double threaded arm tube (C). Spinner will fit on either side.
Mount end cap (E) in front of each large spinner (D) on
either side.
Connect two poles (B) and bottom base spike (A) all
together. After assembly, connect double threaded arm
tube (C) onto the completed pole assembly.
Place spinner in your garden, make sure the base spike is
completely inserted into the soil for stability. If the soil is
too hard, soften with water or shovel otherwise base spike
prongs might bend.
Mount one of each large spinner (D) onto either side of
double threaded arm tube (C).
Mount end cap (E) in front of each large spinner (D) on
either side.
Connect hanging hook (F) onto threaded arm tube (C) to
complete the assembly.
Make sure the wind spinner is hung from a secure structure.
Do not hang spinner over any fragile material. Always take
down the spinner prior to inclement weather.
For most effective results, place the spinner in your garden/
yard that has the most open space so it receives enough
wind to power the spinner.
Once the spinner is assembled, make sure the spinner is
able to spin freely with a gentle spin. Loosen the tightness
on the spinner if needed.
If the spinner is position in a very high winded area, or if
you have very loamy soil, we recommend embedding the
foot stake in cement to give added stability.
The spinner will naturally oxidize over time and use, rust
will naturally permeate. Natural oxidation may affect the
performance of the spinner, if the spinner has stopped
spinning due to oxidation, apply small amount of vegetable
oil onto the arm tube to improve the spinning action of the
spinner.
PRODUCT CODE: 701033
F
05/2020
