Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Verify the spring bolts are firmly in place
before every use.
Dispose of defective, no longer usable
tables according the local regulations.
Installation (Fig. A‒F)
1. First unfold the table legs
Fig. A).
2. Pull the hinges upwards until flat (see Fig. B).
Slide the locking clips
ensure they are stable.
3. Select the desired table height and lock in
place with the spring bolts
Connecting the tables
together
Arow of tables can be connexted with below
method (see Fig. F):
1. Remove the plastic end caps
nection side for the first table.
2. On the second table, remove the plastic end
caps
insert the metal plate
7
slot and tighten with the nut
sert the other side of the metal plate
the first table.
3. Secure the connection by pressing the plastic
locking plug
into the hole.
11
4. Repeat above process if you want to connect
more tables.
Remark: Tables in different angle combination
can also be connected. The connection brackets
can be clipped under two tables (see Fig. F).
8
Remark: There are many possibilities to combine
the tables. Please note it may be not possible to
use the connection brackets
Cleaning and care
To remove more stubborn dirt, use a damp
cloth and, if necessary, a mild cleaning agent.
12 GB/MT
in pairs (see
5
over the hinges to
10
(see Fig. C).
1
at the con-
7
into the
6
. And then in-
9
into
6
in some cases.
8
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Tabla de contenido
