Performance Preparation - Schubert Etude 255 LCD Manual Del Usuario

EN
18

PERFORMANCE PREPARATION

Installing batteries
Zur Verwendung des Geräts sind 6 1,5 V Batterien des Typs AA erforderlich.
Öffnen Sie die Batteriefachabdeckung an der Rückseite und legen Sie die
Batterien nacheinander einzeln, unter Beachtung der richtigen Polarität, ein.
Setzen Sie anschließend die Batteriefachabdeckung wieder ein. (Batterien
sind nicht im Lieferumfang enthalten).
Note: Energy or voltage dissipation will result in the loss of volume
and timbre distortion. Discharged or bad batteries MUST be replaced
immediately to ensure the effect of performance. Always remove the
batteries when you are not using the product for a long time.
Power adaptor
A dedicated power adapter shall be used. Connect the output end of the
adaptor to the power port on the rear of the keyboard, and then the other
end to the power socket. (Note: the input voltage of the adaptor shall be
compatible with the power supply voltage)
Audio output / external headphone
• Audio output: firstly, turn off the keyboard and the external audio
devices, secondly, connect one end of the audio cable to the PHONES/
OUTPUT port on the rear panel rear of the keyboard, and then connect
the other end to the audio input port of the audio devices.
• Headphone connection: When connecting a headphone to the
PHONES/OUTPUT port on the back of the keyboard, the loudspeaker
will be disenabled automatically. In this way, you can perform without
disturbing others.