THOMSON WMP 540 Guia De Inicio Rapido

wmp540 9/11/00 9:35
Congratulations! You have bought a most sophisticated wireless micro-
phone system. Easy to connect to a hi-fi or karaoke system, this micro-
phone uses a high radio frequency as the signal carrier, ensuring a very
clear, sharp reception. It also uses 360°signal technology to give you total
freedom of movement. You can operate two microphone systems simulta-
neously in the same room.
SET-UP
Before you begin, ensure that the rated voltage of the AC/DC power
adapter is the same as the mains power.
1. Connect the AC/DC power adapter to the mains power supply outlet.
Insert the DC connector of the AC/DC power adapter into the 12 Volt
DC input located at the rear of the receiver.
2. Connect the microphone output located at the rear of the receiver to
the microphone input of your hi-fi or karaoke system using the audio
cable.
3. Open the microphone unit and install the 9 Volt battery into the battery
compartment.
When closing the microphone unit, ensure not to damage the antenna.
4. Select the channel.When using only one microphone set, ensure that
channel A is selected on the receiver. When using two microphone sets
in the same room at the same time, switch the second microphone set
to channel B.
Page 1
All manuals and user guides at all-guides.com
DC IN
12 V
MIC OUT
CHANNEL
A B
TUNING
GB