Fagor SP-1650 S Manual De Instrucciones página 7

All manuals and user guides at all-guides.com
interior 13/5/04 14:42
3. SAFETY
The hairdryer is equipped with a an overload
protection system which switches off the
appliance if overheating occurs (e.g. if the air
inlet or outlet are blocked). If the hairdryer
switches off during use, turn the switch to "0"
and wait for 5 minutes approx. Remove the
cause of the obstruction and switch it on again.
4. USING THE HAIRDRYER
• After washing your hair, towel-dry and
comb it.
• Do not use any aerosols or flammable
chemical products on your hair.
• Plug in the appliance and turn the switch
to the desired temperature and air flow.
• Two accessories are provided with the
hairdryer – a concentrator nozzle for
directing the air flow or drying a specific
area, and the diffuser for providing volume.
These accessories are easily fitted onto
the front of the hairdryer.
I/O Switch
This switch/selector is for starting up and
stopping the appliance and for selecting the
air flow and temperature.
Cold air button: The cold air button is for
reducing the air temperature during
functioning, to allow rapid cooling regardless
of the switch position. This button has two
working positions:
Press the button
In this position the button is blocked and
does not need to be pressed
Positions:
0 = Off
1 = Minimum temperature, low air flow
2 = Medium temperature, high air flow
3 = High temperature, high air flow
+ 2 = Cold position, low air flow
+ 3 = Cold position, high air flow
Página 5
• Unplug the appliance before cleaning it.
• Never submerge the appliance in water or
allow moisture to enter it.
• Clean the air inlet grille regularly with a
brush, to remove any dust and hair which
may have become trapped in the grille.
• Clean the outside of the appliance with a
slightly damp cloth and dry it with a dry
cloth.
• Remove the accessories before cleaning
them.
6. WASTE ELIMINATION
materials will allow recyclable materials to be
re-used.
When the appliance is no longer useful, you
should cut its cord to put it out of action and
dispose of it using a suitable waste elimination
procedure. For further information on this
matter, consult your local authorities.
6
5. CLEANING
The materials used in the
packaging, product and
accessories can be recycled.
Correct separation of waste