Test A New Battery First; How The Act Chrome Works - ACT CHROME Instrucciones De Operación

ACT CHROME 12V SLA Intelligent Battery Tester
STEP 2

Test a New Battery First

ESSENTIAL To verify the Ah accuracy of the ACT CHROME, first
connect to a brand new (out of the box) premium quality 12V SLA
C20 rated battery.
IMPORTANT The Ah capacity specified should be obtained on a
brand new battery provided the voltage is between 12.6 - 13.8VDC
and the battery temperature is between 20⁰C - 25⁰C (68⁰F - 77⁰F).
Be aware that at higher or lower temperatures or if significantly
over or under charged, the Ah capacity in the battery could be up
to 50% higher or lower than stated.
STEP 3

How the ACT CHROME works

The Ah capacity available is dependent on battery temperature
and state of charge. The Ah capacity displayed on the ACT
CHROME is calculated by simulating a full 20 hour (C20) battery
discharge test in seconds. The technology employed by the ACT
CHROME achieves this by applying a pulsed frequency load test
which accurately measures Ah capacity available.
IMPORTANT The ACT CHROME Ah result compares to 12V SLA
batteries with an Ah capacity specified at C20 hours.
6
All manuals and user guides at all-guides.com
www.actmeters.com