Idiomas disponibles
Idiomas disponibles
www.1byone.com
Wireless door chime kits user manual
All doorchime with Easy Chime Logo working together
Thank you for purchasing 1Byone wireless door chime transmitter, before use, please read carefully the
following use instructions. Failure to do so may render your guarantee void.
Package Contents
- 1×Transmitter
- 1×Adhesive backing
- 1×3V CR2032 battery
- 1×User manual
- 2×Wall plugs
- 2×Screws
Features
With Blue LED indicator
IP44 waterproof design
Specifications
- RF frequency: 433MHz
Transmitting range: 300 feet in the open air
Power Supplier
- 1×3V CR2032 battery (included)
1 x 3V Lithium
button cell
(included)
Getting started
Transmitter is powered by 1×3V CR2032 battery (included)
Open the back of transmitter with a small flat screwdriver, insert the battery observing the correct polarity.
All manuals and user guides at all-guides.com
Waterproof bell push button
Name plate
Transparent cover
1
Note: To replace the battery, push the tip of the metal prong located on the perimeter of the battery holder,
re-insert the new battery after the old one ejected, observing the correct polarity.
Important Note :
1) If you do not plan to use the device for a long time, such as at a vacation,please remove the battery
from the chime (receiver) and push button(transmitter) ,then put them in a safe place.
2) Improperly using a battery may cause it to leak and damage nearby items, and can create the risk of
fire and personal injury. Batteries should not be left in an area where the children can reach them as
they may pose a chocking hazard.
3) Recycle used batteries following environmental protection practices.
Operating
Matching the units
All doorchime with Easy Chime logo can work with this transmitter together, one feature of this function is
both receiver and transmitter can match each other automatically.
After inserting the batteries of receiver and transmitter, press the push button, this will send a signal to the
receiver and will automatically register and memorise the signal as an operation code.
1 transmitter can work with unlimited receivers, 1 receiver can work with 5 transmitter max.
1.If there is interference from another electronic device,your operation above not working, remove the
power of receiver re-power it after 1 minute, ,press the code matching button,then press the push button.
2. If your transmitter is missing,you can buy the only Transmitter from store with Easy Chime logo and
operate with the same way above.
3. If adding a transmitter or receiver,press the matching code button,the press the push button.
Testing the units
Before final installation, verify the transmitter can work with receiver properly.
Installing
Select a location near the door and fix the transmitter on the wall using the double sided adhesive backing
or screws.
Write the name on the name plate and fix the transparent cover
Important note:
Please test the operating range between the push button and chime. The operating
range is 300 feet（Max without obstructions） ,but this distance may be less due to walls or
obstructions such as Metal or UVPC doorframes can also reduce the operating rang.
IMPORTANT: PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
www.1byone.com
2
