Tabla de contenido
Manage Cables
IMPORTANT: Fully extend arm assembly
1.
Remove cable covers
by loosening the end (a), then sliding off (b).
C
2. Route your cables through the arms
3. Reattach cable covers
over the cables.
C
TV Adjustments
TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight, adjust the side tension knob
NOTE: Once your TV is in place, tighten the side tension knob
unwanted movement.
NOTE: Additional tension can be applied using a 3/16 inch hex key (not supplied).
LEVEL ADJUSTMENT
EXTEND / RETRACT -- ONLY IF NECESSARY
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight when moving, adjust bolts
using a 3/32 inch hex key (not supplied).
CAUTION:
Avoid potential personal injury or property damage!
DO NOT remove bolts
, only turn
R
enough for slight adjustment.
REMOVING THE TV
1.
Disconnect cables.
11
2.
Remove screw
.
3.
Lift TV up and off the arm assembly
08
to ensure enough slack in cables.
08
.
08
C
.
T
to prevent
T
1. Loosen
screw
11
.
11
R
HEAVY! You may need assistance with this step.
1
8
.
1
C
C
a
b
08
2. Level
your TV.
08
2
08
11
2
3
C
T
3. Retighten
screw
11
.
11
R
3
05
C
08
9
Tabla de contenido
