Once memorized,you can recall any of the 4 heights by pressing the
corresponding button of the corresponding height position,then automatically
respond to the stored height.To stop,press any key.
4) Height limit setting
The system supports the height limit of the desktop. When the current height
is set to the height limit of the desktop, press the UP + DOWN button for 5
seconds at the corresponding height, then the buzzer sound will be heard,
Cancel the storage height: Method 1: Initialize the system at this time, the
system height limit is canceled. Method 2: Let the desktop run to the limit
high or low point, while holding down the "UP" + "DOWN" button for 5 seconds,
you will hear the buzzer sound, indicating that the restriction position was
canceled successfully.
When the table is in the first half of the itinerary, the limit is high.
When the table is in the second half of the itinerary, the limit is the lowest
position.
5) Lock and Unlock the desktop
Lock: Press the "SET" + "UP" at the same time for 5 seconds. When the digital
tube displays "Loc",it means the system has been locked and you can't make a lift to the
system operation.
Unlock: Press the "SET" and "DOWN"at the same time for 5 seconds. When the
digital tube displays from "Loc" to normal digital display,it means the system has
been unlocked.
11