KTM Power Parts 60312929000 Instrucciones De Montaje página 7

2
3
4
5
6
7
8
9
3
4
5
6
7
8
9
b
b
11
c
c
Scope of supply:
1x Top Case (1)
1
1x sliding plate (2)
4x collar screws (3)
4x sliding discs (4)
4x rubber washer (5)
4x sliding bushings (20x12x1,5) (6)
4x sliding bushings (24x12x1,5) (7)
4x distance sleeves (8)
4x rubber mounts (9)
10
1x locking cylinder, plastic case (10)
Before using the Top Case, it is important that you read the following instruc-
tions
.
WHEN THE TOP CASE IS MOUNTED, ESPECIALLY WHEN IT IS LOADED,
GREATER SIDE WIND SUSCEPTIBILITY WILL CAUSE A CHANGE IN VEHI-
CLE HANDLING CHARACTERISTICS WHILE RIDING, TAKING CURVES,
AND BRAKING. EXERCISE CAUTION IN HIGH WINDS DUE TO THE CHANGED
VEHICLE HANDLING CHARACTERISTICS, APPROACH THE RECOMMEN-
DED SPEED OF 150 KM/H SLOWLY.
Distribute the load evenly and secure it well to prevent slipping.
2
Ensure that the load never exceeds 5 kg.
Do not use a high-pressure cleaner to clean the Top Case as the high pres-
sure may damage the seals.
Assembly
- Position the sliding bushings (7) (included), distance sleeves (8) (inclu-
ded) and rubber mounts (9) (included) on the carrier plate (11) (original
b
piece) 4 times as shown in figure (b).
b
4x
b
- Position the sliding plate (2) (included).
2
- Fasten the sliding plate (2) (included) with the collar screw (3) (included)
and disc (4) (5) (6) (included).
c
2
c
c
4x
60312011000
0035080356
60312012030
60312012050
60312012040
60312012020
60312012010
60312012000
60312924050
7