Battery Life; Assembling The Camera - Evolveo SportCamW7 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 110

Battery life:

The battery icon will alert to a low battery status. If the battery reaches 0% when recording is being in process, the camera
will save the file and power OFF.
To charge the battery:
1. Connect the camera to a power source.
2. The red status LED indicator remains on while the battery is being charged.
3. Once the battery is fully charged, the red status LED will turn off.
The battery will be charged to 100% in 4 hours when using 500mAh USB-compatible A/C wall charger.
Other chargers may charge at only half this rate.
No damage will occur to the camera or the battery if the camera is used prior to full charge.
To remove the battery:
1. Remove the battery cover (on the back of the camera) by placing your thumb into the indentation in the battery cover
and slide it to the left.
2. The cover will release and pop out. Grasp the battery pull-tab and remove it from the camera.

Assembling the Camera

The camera comes with 2 types of the backdoors – waterproof and sound-in.
Use the waterproof backdoor to protect the camera from water leak-in up to 60m underwater.
When used in rain or under water, there may occur water drops on the lens.
39
Tabla de contenido
loading

Productos relacionados para Evolveo SportCamW7

Tabla de contenido