Idiomas disponibles
Idiomas disponibles
2.2 Battery Safety
1) Use only brand new batteries of the correct size and power.
2) Do not mix old and new batteries, different types of batteries (zinc, alkaline or
rechargeable).
3) If using rechargeable batteries, ensure they are all the same capacity.
4) Do not try and charge non-rechargeable batteries.
5) Rechargeable batteries should be charged by an Adult or under Adult supervision. Stop
charging immediately if you notice any abnormal behaviour.
6) Do not throw batteries in the fire.
7) Replace all batteries of the same type/brand at the same time.
8) The supply terminals are not to be short circuited.
9) Remove empty batteries from the product.
10) Batteries should be changed by an Adult.
11) If the Weather Station is going to be inactive for a long period of time, please remove all
batteries.
12) For your safety, please operate according to these instructions.
2.3 Power Cable and Battery Installation
In order to get the full screen brightness and easy visibility of all numbers and symbols, we
recommend you use the USB Cable (included) with a USB Power Plug (not Included) rather
than batteries for the main unit.
●
Plug the charging cable USB-A male into a 5V/2A QC2.0 or above power adaptor.
●
Connect the power adaptor to the mains socket.
●
Plug the alternate end of the USB Cable into the port on the back of the clock.
●
If connected correctly, the lights on the clock should light up.
A 5V/2A QC2.0 or Above Power Adaptor is required for the clock to work correctly on
●
Gently open the battery compartment located on the rear side of the unit.
●
Insert 2 X 1.5V AAA batteries observing the correct polarity, as marked inside the
compartment.
●
Replace the battery compartment door.
2.4 Reset Function
If the clock is not working properly or does not respond to your input remove all
●
batteries and power for 30 seconds.
This will reset the clock to factory defaults.
●
Mains Power:
IMPORTANT:
mains power.
Battery Power:
4
Capítulos
