Manhattan 151009 Guía De Instalación Rápida página 2

SAS PCI Express Card • Quick Installation Guide
Thank you for purchasing the MANHATTAN
151009. For pin assignments and instructions when installing a new
operating system, refer to the user manual at www.manhattan-
products.com.
Installation
1. Turn off the system. Insert the card into an available x8 or x16 PCI
Express slot. Turn the system back on.
2. During system bootup, Windows will display "Found New Hardware
Wizard" (in XP), "Windows needs to install.... " (in Vista) or "Device driver
software was not successfully installed" (in Win7). In each case, click
"Cancel" to continue.
3. Right-click "My Computer, " select "Manage, " then select "Device
Manager. " Then go to "SCSI and RAID Controller" (XP) or "Other Devices/
RAID Controller" (Windows 7/Vista) to start the manual driver
installation — first "Found New Hardware Wizard, " then "Hardware
Update Wizard. "
4. Place the included driver CD in the CD-ROM drive. Depending on the
operating system, select "\SAS\Marvel\M9485\Windows" and either
"i386" (32-bit) or "amd64" (64-bit), then click "Next. "
5. For Windows XP, select "Marvell 94XX SAS/SATA RAID Controller" and
"Marvell RAID Virtual Device" and click "Install. " For Windows 7/Vista,
select "Marvell Storage Controller" and "Marvell 94XX SAS/SATA RAID
Controller" and click "Install. "
6. If prompted, restart the computer; otherwise, follow the instructions
until you can click "Finish. "
Verification of Installation
1. Right-click "My Computer, " then click "Manage" and "Device Manager. "
2. Double-click "SCSI and RAID Controllers. " If no exclamation points (!) or
question marks (?) display in front of "Marvell 94XX SAS/SATA RAID
Controller, " the installation was successful. If either does appear, go
back to Step 4 above.
2
ENGLISH
SAS PCI Express Card, Model
®
English