Selecting Tv Sound; Using Menu - Sunstech TLRI1985 Manual De Instrucciones

Example:
To select 1-digit channel (e.g. Channel 5):
● Press the 5 button.
To select 2-digit channel (e.g. Channel 20):
● Press the 2 button, follow by 0.
To select 3-digit channel (e.g. Channel 100):
● Press the 1 button, follow by 0, then 0.

SELECTING TV SOUND

In TV mode, according to the type of sound signal, use the NICAM/A2 button to select an appropriate
mode from the following: MONO, STEREO, DUAL I
● When a mono program is received, you can only choose MONO.
● When a stereo program is received, you can switch between STEREO and MONO.
● When a bilingual program is received,you can switch among DUALI, DUALII
and MONO.
DUALI sends the primary broadcast language to loudspeakers.
DUALII sends the secondary broadcast language to the loudspeakers.
Note:
If the stereo signal is weak, it will be switched to Mono automatically.

USING MENU

1. Press the TV-MENU button to display the main menu.
PICTURE MODE
BRIGHTNESS
CONTRAST
SATURATION
SHARPNESS
HUE
COLOR TEMP
2. Press the p
/q
3. Press the u button to enter the sub menu, then use p
options and press t
4. Press TV-MENU button to save and return to the previous menu or press EXIT button to exit.
Note:
1. According to different input signals, the available functions may not be the same.
2. Some items are disabled in gray when they are unavailable in a certain mode. Those items
are enabled when corresponding modes are activated.
BASIC OPERATION
PICTURE
USER
STANDARD
MOVE
ADJUST
button to select menu you want.
/u to adjust the value.
DUAL II .
and
50
50
50
0
50
MENU
BACK
/q
11
to select the sub menu