Idiomas disponibles
Idiomas disponibles
Pan detection
The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.
Residual heat indication
After swittching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on, don't touch the heating zones and don't put any heat
sensitive object on them. There are risks of burn and fire.
Power Booster and Double Power Booster function
The Power Booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
Power Booster is foreseen for example to heat up rapidly big quantities of water, like nuddles
• Start up / Stop the Power Booster function:
Action
Zone selection
Start up the Power Booster
Stop the Power Booster
• Start up / Stop the Double Power Booster function:
Action
Selection of the zone
Start up Power Booster
Start up Double Power Booster Re-press key [ P ]
Stop the Double Power Booster Press key [ P ]
Stop booster
• Power management:
The hole cooking hob is equipped by a maximum of power. When the Power Booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
Heating zone selected
[ P ] is displayed
Control panel
Press key [ 0 ] from the zone
Press key [ P ]
Slide on the "SLIDER"
Or press [ P ]
Control panel
Press key [ 0 ]
Press key [ P ]
Slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
10
Display
[ 0 ] and control light on
[ P ] during 5 min
[ P ] to [ 0 ]
[ 9 ]
Display
[ 0 ]
[ P ]
[
and P ]
[ P ]
[ 9 ] to [ 0 ]
(example: power level 9)
Capítulos
