Operating The Unit - Oster 76998-320 Instructivo

4. The LED will turn on if the
trimmer is inserted properly.
5. If the LED will not turn on, then
re-insert the trimmer into the charging
stand and push down gently on the trimmer
to engage the contacts. If the LED still fails
to turn on, then plug one end of the auxiliary
cord into the side of the charging stand and
the other end into the trimmer. If the LED
turns on, then there may be dirt or grease on
the contacts of the charging stand. Clean the
contacts and re-insert the trimmer into the
charging stand. If the LED still fails to turn
on then follow the return procedure under
the warranty and service section.
6. The LED will stay on as long as the unit is in
the charging stand or if the auxiliary cord is
being used. The LED will turn off when the
unit is removed from either the auxiliary cord
or the charging stand or the power plug is
removed from the outlet.

OPERATING THE UNIT

The trimmer is designed to operate in either cordless or corded mode. The
preferred method is cordless as it ensures a longer life for the battery.
Always apply one to two drops of the provided blade lubricant or other Oster
approved lubricant to the blades before use.
Cutting efficiency may drop and the blades and motor may be damaged if hair is
dirty or hair styling agents have been applied. Always ensure that hair is clean
before using the trimmer.
Cordless Operation
1. Remove the trimmer from the charging stand. (See section titled
"Charging the Unit" before initial use.) The LED should turn off.
2. Turn the trimmer on using the "On-Off" switch located on the top of the
unit and use the trimmer.
3. Turn the trimmer off when finished using.
4. Cover the blades with the provided blade guard to protect the blades.
5. Insert trimmer into charging stand or plug into the auxiliary power cord.
(See section titled "Charging the Unit".)
CHARGER/
RECHARGER
LED