Charging The Power Bank - MAGINON MPP 5200-LI Manual Del Usuario

Start

Charging the Power Bank

Charge integral battery fully prior to using the Power Bank.
Charging time of the battery depends on the selected
charging source and its output.
− For charging the Power Bank only use power
supplies with an output voltage of 5 V and
an output current of at least 1 A or a USB 3.0
connection of your computer.
− When using a USB connection for charging,
ensure that at least one further USB connection
remains unassigned in order to ensure that
sufficient Amps are available for charging. This
also applies when using USB 3.0 connections.
Charging using the USB charging plug
Connect USB charging plug
switched-on PC or a USB-power supply (not supplied).
During charging, the current charging status is shown by the
charging LEDs
LEDs
One LED flashes
One LED is lit, the second LED flashes.
Two LEDs are lit, the third LED flashes
Three LEDs are lit, the fourth LED flashes
All LEDs are lit
16
All manuals and user guides at all-guides.com
4
8
.
of Power Bank to a
Charging status
< 25 %
25 - 49%
50 - 74%
75 - 99%
100 %