Low Battery Indicator; Storage And Cleaning - Braun ExactFit 3 Manual De Instrucciones

All manuals and user guides at all-guides.com
Irregular heart beat detector (for BP5900PH-EMEA only)
The appearance of this symbol
during the measurement. Talking, moving, shaking or an irregular pulse during the
measurement can result in the appearance of this icon. Usually this is not a cause for concern,
however if the symbol appears often, we recommend you seek medical advice. The device does
not replace a cardiac examination, but service to detect pulse irregularities at an early stage.

Low battery indicator

When the low battery indicator
the four batteries need to be replaced with alkaline LR6 (AA) batteries.
** After replacing batteries, BPM will go into time-setting mode automatically and show the
last measurement time on screen. Please set the current date / time before taking the next
measurement to get correct average result.

Storage and cleaning

• Always keep the unit in the carrying case after its use.
• Do not put the item directly under the sunlight, in high temperature or humid and dusty
places.
• Do not store in extremely low (less than -20°C) or high (more than 60°C) temperature.
temperature.
• Use a piece of cloth with water or mild cleansing agent to clean the case and then use a piece
of dry cloth to wipe it dry. Use a piece of dry cloth to wipe the cuff when it is dirty.
• Do not use any strong cleansers to clean it.
• When the unit is not to be used for a long time, remove the batteries.
(Batteries may leak or cause harm).
What to do if .....
Problem Reason
Heart rate Appears in the measurement
symbol condition and flashes when
pulse is detected.
Low battery Appears when the battery
indicator voltage is excessively low or
the positions of the batteries
are incorrect.
Measuring Appears when the accurate
error blood pressure and pulse
could not be obtained.
signifies that a certain pulse irregularity was detected
flashes on the display, it means the battery is low and
Solution
• Measurement in progress, remain quiet.
• Replace all four batteries with new ones.
Insert the batteries in the correct
positions. Be aware of +/- positions.
• Press "start/stop" button again and
remeasure.
• Check if cuff is wrapped
according to instructions.
• Check that there are no kinks in tube.
• Check palm if exerting effort.
• Check if talking or moving
during measurement.
• Check if posture is correct.
9