Saving Images To The Usb Flash Drive; Clearing Internal Memory - MediCapture MediCap USB100 Guia Del Usuario

Saving Images to the USB Flash Drive

Each time you press the Capture Images button, a still image is
saved to internal memory located inside the USB100 box. When you
finish your imaging session, you must press the Save to USB
Memory button to copy the images from the internal memory to the
USB flash drive memory before you remove the flash drive. After
the images have been copied, you can safely remove the flash drive
to transport your images to your computer.
While the images are being copied to the flash drive, the on-
screen message "Saving Images to USB" will be displayed.
Also, the green LED light under the Save to USB Memory
button will blink on and off. The copy process may take
several minutes depending on the number of images.
When all the images have been copied to the flash drive, the
message, "All Images Saved to USB" will be displayed and
the LED light under the Save button will stop blinking.
DO NOT REMOVE THE FLASH DRIVE UNTIL THE GREEN
LED LIGHT UNDER THE SAVE BUTTON HAS STOPPED
BLINKING.

Clearing Internal Memory

From time to time, you will need to clear the internal memory to
make room for more images (for a description of internal memory,
see page 11). Usually, you will do this after you save images from
internal memory to the flash drive (that is, after you press the Save
to USB Memory button).
After saving images to the flash drive, a menu will be displayed that
allows you to clear the internal memory. Since all of your images are
now on the flash drive, you usually do not need to keep them in
internal memory any longer so you will select "Clear Internal
Memory" in the menu. An exception is if you want to load the same
images onto a second flash drive (see the next section).
Clearing internal memory frees up the entire internal memory. You
can also free up some of the internal memory by deleting individual
images as described on page 12.
IMPORTANT NOTE!
13
MediCap™ USB100 User Guide
USB100-UG-E-070324-MC