ENG
• Country: Select the corresponding country where the device is located.
• WMM: Wi-Fi Multimedia, when "Enabled", will provide the basic Quality of Service (QoS) functions.
WMM prioritizes traffic based on four access categories (AC): voice (AC_VO), video (AC_VI), best effort
(AC_BE), and background (AC_BK). However, it does not provide the guaranteed bandwidth range. It
is suitable for well-defined applications that require QoS, such as Voice over IP (VoIP) on Wi-Fi phones.
• User Isolation: It is recommended to activate this function only if necessary, as if activated, all termi-
nal devices connected via Wi-Fi will not be able to access each other after connection.
• Max Associated STA: Limit the number of devices that can connect to this AP, 40-50 is recommen-
ded.
• Beacon Interval: The Beacon Interval could help your WiFi network maintain connection with other
devices. It is recommended to keep the default values.
• RTS/CTS Threshold: The wireless AP sends request to send (RTS) frames to a particular receiving
device and negotiates the sending of a data frame. After receiving an RTS, the device responds with
a Clear to Send (CTS) frame to acknowledge the right to initiate transmission. It is recommended to
keep the default values.
• Weak Signal Rejection Threshold: The AP will reject the connection to any wireless device that tries
to connect with a signal strength lower than the set value.
• 2.4G / 5G Channel: 2.4G / 5G frequencies support automatic adaptation to allowed wifi channels
according to the selected country code.
• 2.4G Bandwidth: Support 20/40/40 + / 40- MHz
• 5G Bandwidth: 20/40/40 + / 40- / 80MHz
• 2.4 / 5G TxPower: 2.4G supports up to 27dBm and 5G supports up to 23dBm.
10.4
PING-WatchDog
After the function has been enabled, the AP can perform line detection and perform preset actions.
• Watchdog monitoring address: The AP performs the PING test on the address or domain name
• Interval of checking: Ping test interval (unit: second)
• Number of failure: Ping checks the number of consecutive failures and takes actions. The suggested
value is 3.
• Ping Timeout: maximum ping time (unit: second)
• Watchdog monitoring action:
- Reboot: Reboot the device
11