Technical Specifications - Telstar TPA120210AD Manual De Instrucciones

INSTRUCTIONS
1.
If you are usingAC power, please put the power switch at the ON/AC position.
2.
If you are recharging, the blue indicator lights and both indicators will light when fully recharged.
3.
If you are operating by battery, please switch to the ON/DC position.
4.
For full recharge, please keep the unit recharging for approximately 10-12 hours.
5.
Please recharge the unit only under the voltage indicated in this manual or marked on the device.
6.
To protect the battery, please recharge completely every time after using all charge.
7.
To save battery power, please put the power switch in OFF after finishing operation.
Use of Bluetooth:
1.
Turn the power on, press the "MODE" key or "INPUT" key on the panel or remote control, and switch the
speaker to Bluetooth channel. Then turn on the mobile phone Bluetooth function.
2.
Search the Bluetooth device list and select the Bluetooth name "Bluetooth". The speaker will make a noti-
fication tone when the connection is successful.
3.
Play the music on your mobile phone using your Bluetooth DJ Speaker. The music will be transferred via
Bluetooth and sound comes out through the speaker.
4.
To disconnect the Bluetooth device, the user can turn off Bluetooth function on the mobile phone, or press
the "MODE" key or "INPUT" key on the speaker panel or remote control to change the input mode.

Technical specifications

• Power: 120W
• Voltage: 110V / 60Hz
• Frequency: 50Hz ~ 20K HzS / N Ratio: ≥71dB
• Power cord: ≤0,7% (1W)
• FM Frequency: 87.50 - 108.00 MHz Unidad de disco: 1 "+ 2x12"
7
TROLLEY SPEAKER
TPA120210AD