How To Operate The Transceiver; Band Selection - TTI TCB-550N Manual De Uso

8. How to Operate the Transceiver

Make sure the microphone is connected to the
1)
microphone jack.
Make sure the power cable is connected properly.
2)
Make sure the antenna is connected to the antenna
3)
receptacle.
It is better to put the squelch control knob turned fully
4)
counter-clockwise. (In case of the manual squelch mode)
Turn on the transceiver and control the volume level.
5)
Adjust the squelch control knob to the optimum level.
6)
Select your desired channel.
7)
To transmit, press the PTT button and speak to the
8)
microphone.
Release the PTT button to receive.
9)

9. Band Selection

while the band information is blinking. Press the PTT button of the
microphone, or wait for 5 seconds to complete the selection and go
to the transmit and receive mode. This transceiver has "EC" band
setting when it is shipped out from the factory.
Settings Display
EC
E
F
PL
TCB-550N
Pressing AM/FM button, turn on the transceiver.
The LCD display offers you the band information.
The band chart for each area is as follows.
To change the band, press the Up/Down buttons
Europe 40 Ch FM 4W
Spain 40 Ch AM/FM 4W
France 40 Ch FM 4W, 40 Ch AM 4W
Poland 40 Ch AM/FM 4W
( Polish frequencies : 5KHz)
Band
11