Uline H-2126 Instrucciones De Montaje página 2

Figure 1
Figure 2
Figure 3
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 2 OF 6
ASSEMBLY
1. Verify all parts are present before beginning.
2. Flip the tabletop upside down. Take one leg at a time
Right
Left
3. Insert the cross brace with the umbrella holder
Underside
of Table
Underside
of Table
4. Flip the table upright and loosely attach the four
5. Ensure the tabletop and bench seats are level, then
1-800-295-5510
uline.com
Hardware is located in a white box.
and loosely attach the end of the leg to the tabletop
using one bolt, two washers and one nut. The leg
braces are an inside mount. The legs are labeled
left and right. Match the legs to the left and right
markings on the underside of the table.
(See Figure 1)
facing upward and loosely bolt to the corresponding
corners using one bolt, two washers and one nut.
(See Figure 2)
bench seats to the legs with the leg braces having
an inside mount. (See Figure 3)
tighten each bolt, finishing with the cross brace.
NOTE: H-2300 Mounting Hardware sold
separately.
0918 IH-2126