LUND Genesis Instrucciones De Instalación página 4

All manuals and user guides at all-guides.com
Installation Steps
NOTE: Actual application may vary slightly from drawings.
The bow rests upon the top of the clamp with each of its legs draped over the sides.
Some truck boxes are not secure and require bows of different lengths. On these trucks the bows will be marked as Bow 1, Bow 2, etc.
The location closest to the cab is bow 1.
D
B
F
10
Unroll cover and follow directions below to fasten cover to tonneau rails.
A
A
Place tan lip of the cover retainer under the
A
upper lip of the tonneau rail.
Rotate the retainer downward. The tension of the cover will fully
engage the cover retainer into the tonneau rail.
B
A NOTE: it is recommended to complete this step on all three
sides before proceeding to the next step.
B
Using palm pressure, glide hand down the length of each
A
tonneau rail to lock the cover retainer into the tonneau rail.
To disengage cover, pull upward and out, starting at a corner end.
B
11
Page 4 of 5