E.3 - Purifier Mode; E.4 - Sleep Mode; E.5 - Wi-Fi Function (Can Only Be Activated From The Display); F - Timer Key (Can Only Be Activated From The Remote Control) - Olimpia splendid FUTURA Instrucciones Para El Uso

• When ambient temperature reaches the set temperature value, the heating function interrupts and the
appliance blows a slight breeze for approximately 40 seconds, then it enters Stand-by mode.
When ambient temperature drops below the set temperature, the heating mode reactivates automatically.
• Default temperature is set at 25°C.
• After 9 hours of continuous operation, the appliance automatically stops operation.
WARNING: When the appliance enters heating mode, the air duct (2) over-
heats. Even after switching off, the appliance may still be hot.
The appliance is equipped with an integrated protection sensor which auto-
matically switches off the appliance if the latter is accidentally overturned
or overheats excessively.
In this case:
a. switch off the appliance by means of the ON/OFF switch (8) and discon-
nect the power plug;
b. let the appliance cool down for 15/20 minutes;
c. restart the appliance.
If the issue persists, disconnect the plug from the power outlet and please
contact the retailer or the technical assistance service.
3.5.e.3 - Purifier mode
To activate/deactivate this mode, press key (A10), the LED (D5) appears on the display.
This mode switches off automatically after 1 hour of operation.

3.5.e.4 - Sleep mode

To activate/deactivate this mode, press key (A3), the display shows the symbol "LL".
This function automatically lowers fan speed to a minimum.
This mode cannot be activated in heating mode.

3.5.e.5 - Wi-Fi function (can only be activated from the Display)

To activate this function, keep the ON/OFF key (D1) on the display pressed for a few seconds until the ap-
pliance emits the third beep and the LED (D5) starts blinking.
To deactivate this function, keep the ON/OFF key (D1) on the display pressed for a few seconds until the
appliance emits the third beep.
When the appliance connects with your smartphone, the LED (D5) stops blinking and remains
switched on steadily on the display.
The instructions for connection to the WiFi network and for use oft he App are available on
www.olimpiasplendid.com in the download area.

3.5.f - Timer key (can only be activated from the remote control)

When the appliance is on, press this key and the timer changes according to this sequence:
0h (Timer off) ---> 1h ---> 2h ---> 3h ---> .. 8h ---> 0h (Timer off) ---> ..
The display, after a few seconds from timer setting, returns to display the percentage of detected humidity.
EN - 14