Whalen KEA7PD Instrucciones De Montaje página 4

Ø5/16" x 38 mm
(5 used in this step)
To avoid causing damages to the thread, DO NOT over-tighten the bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Position the Table Top (A) face down on a level and protective surface as shown.
3. Flip one Trestle (B) around and attach it to the Table Top (A) using the end wood dowels as a guide.
Insert five 38 mm Bolts (1) with Lock Washers (3) and Flat Washers (4) through the drilled holes on the
top rails of the Trestle (B) and screw into the Table Top (A).
Assembly Instructions
Bolt
①
DO NOT fully tighten the bolts initially until all the bolts are ready to assemble.
1
3
4
A
Lock Washer
(5 used in this step)
③
DO NOT
4
B
1
3
4
Flat Washer
(5 used in this step)
④
fully tighten the bolts in this step.