Safety Information - 1More ColorBuds Manual Del Usuario

Product Overview
Charging Pins
Silicone Ear Tip
Infrared Sensor
Pairing Button
Placement
Power
Power On Take the headphones out of
the charging case (with charge), the
headphones will turn on automatically.
* Above functions are available for either earbud in individual or Stereo mode.
Charging
To charge the case with Type-C cable.
Full charge will take around 85 mins.
To charge the headphones with the case.
Put headphones in correct slot until it
locks in via magnetic slot. Red light
of headphones will indicate
headphones are charging.
Full charge will take around 70
mins. Red light of headphones
turning off indicates charging is
complete.
Tap Controls
Phonecalls and music can be controlled by tapping the outside of the earbuds.
Phone Call
Playback
* Above functions are available for either earbud in individual or Stereo mode.
* To decline a call, change a song or control volume, please operate on paired mobile phone
or device.
* Above functions may vary with different devices.
1MORE (1) Year Limited Warranty
1MORE Inc., ("1MORE") warrants to the original retail purchaser that this product is to be free from
defective materials and workmanship for a period of one year from the date of purchase if it is properly
used and maintained. If this product proves defective in either material or workmanship, 1MORE, at
its option, will (a) repair the product with new or refurbished parts, or (b) replace the product with an
equivalent new or refurbished product, at no charge for parts or labor. If the product model is no
longer available and cannot be repaired effectively or replaced with an identical model, 1MORE at
its sole option may replace the unit with a current model of equal or greater value. In some cases,
modi cation to the mounting surface may be required where a new model is substituted. 1MORE
assumes no responsibility or liability for such modi cation. TO OBTAIN A REPAIR OR REPLACEMENT
UNDER THE TERMS OF THIS WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST
AND THE ORIGINAL DEALER SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS
OR REPLACE THE PRODUCT WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but not limited to a receipt or
sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.
Limitations:
• This limited warranty does not cover the failure of the product resulting from improper installation,
misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential
damage to other components or premises which may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance with 1MORE's instructions.
• This limited warranty is null and void for products with altered or missing serial numbers and for products
not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party.
FAQ
1. Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes.
2. Why the headphones cannot connect to my cellphone, or take a long time to connect?
1) If the earbuds cannot pair to one another, and only one earbud will pair with your cellphone, then put
both buds back into the charging case and quickly press the pairing button 3 times, click the device
name, they should now pair correctly to the phone.
2) To pair the earbuds to a new cellphone, simply place them into the charging case and depress the
pairing button for 2 seconds. Then click the new device name and pair with the new cellphone.
3. Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your
device name and make sure the "Media Audio" option is on.
4. Why there is no sound from the headphones while making phone calls after successfully connecting
to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your
device name and make sure the "Phone Audio" option is on.
5. Why the Bluetooth connection is not stable and causes some interruptions?
1) Try shortening the distance between your headphones and device. Avoid solid barriers in between.
2) Please keep away from strong interference sources, such as Wi-Fi and GPRS.
3) Please make sure the Bluetooth antenna of your device is not blocked.
6. Why some control functions do not match those in the manual while using third party music/video
player Apps?
Your operating system and the third party music/video player apps may have different settings for the
in-line remote control functions. We recommend that you use the music/video player apps that your
device has originally provided.
7. I turned the headphoens up to the maximum volume, but why the actual volume still sounds low?
In different operating systems, especially some Android systems, the headphones and your device
have separate volume control systems. Please adjust the volume controls on both the device and the
headphones according to your preference.
* For more detailed product FAQs, please visit the product support section under www.1more.com
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching re,
explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of ammable liquid or gas; and A battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable liquid or gas.
The symbol indicates DC voltage.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2014/53/EU in order to
be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when
he buys a new electrical or electronic equipment.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identi er:
Trade Name: 1MORE
Model No.: ESS6001T
Responsible Party – U.S. Contact Information
1MORE USA, Inc.
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121
Tel: 1-855-551-6673
E-Mail: [email protected]
Microphone
For Environmental
Noises
Talking Mic
Charging Case
LED
Power Off Put the headphones back into the correct
slot of the charging case and close the lid, they will
automatically turn off and start charging.
The LED light of charging case will
indicate different battery status: red
light indicates low battery, orange
light indicates medium battery and
green light indicates full battery.
Answer/End call: Double-tap
Voice control on cellphone:
Tap 3 times when Bluetooth
on and no phone calls
Play/Pause: Double-tap
®
In The Box
Headphones x 1Pair Type-C Charging Cable x 1
Charging Case x 1
User Guide x 1 Warranty Card x 1
Fit
Silicone Ear Tip
XS / S / M / L
Replace
Headphones Pairing
1. The Left and Right headphones will automatically pair to
eachother after the lid is open when they are in the case
(with charge).
2. If the Left and Right headphones taken out of the case
have been powered off or in sleep mode, put the
headphones back into the charging case (with charge),
they will pair to eachother automatically.
Switching Primary/Secondary Between
Left and Right Earbud
The default setting with the earbuds is Right as the Primary
and Left as the Secondary. As the Primary, Right earbud will
automatically connect to your device, while the Left earbud
connects to the Right (when same battery level).
1. Left earbud will switch to Primary when the battery level of
the Left earbud is 30% higher than the Right.
2. If Primary becomes out of range from connected device,
then the Secondary will switch to Primary and initiate
pairing mode to connect to your device. Previous Primary
will enter Left & Right pairing mode.
Bluetooth Pairing To The Device
To connect to your device during rst use, turn the headphones on to enter pairing
mode, the red and blue lights of the Primary earbud will ash alternatively.
Headphones will power off if not paired to a device within 3 minutes.
* After rst successful pairing, headphones will automatically connect to your device.
To skip previously paired device and pair with a new one, put headphones back
into the case, press and hold the pairing button for 2 seconds and select the new
device name when powered on (no music or phone calls) to re-enter pairing mode.
* Above functions are available for either earbud in individual or Stereo mode.
Battery Noti cation
LED indicator for low battery:
when there is 25-30 minutes
of use left, you will hear the
noti cation sound and the LED
indicator will ash red twice a
second, ashing every 10
seconds alternately.
LED indicator for case battery status: when
case battery is too low on charge, LED
indicator will ash in red once a second,
ashing by 1 second alternately and lasting
10 times.
Smart Playback
An IR Sensor automatically detects when you take out your headphones to stop playback intuitively and
resumes playback when you put them back in.
To turn off Auto-Play connect the headphones to the 1MORE Music APP.
Extra Functions
1. If headphones cannot pair normally when power on. Open the case, quickly click the pairing button
in the case for 3 times to initial searching for Left & Right pairing.
2. For single mode: put Left and Right earbuds in the case, double-click the pairing button and enter
the separate pairing for single earbud. Then the Left and Right earbuds can be connected to different
cellphones.
3. To unpair the cellphone:
Put both L & R into the case, and then press and hold the pairing button in the case for 8 seconds.
4. OTA Firmware Update: can be done synchronously with 1MORE Music APP when Left and Right
headphones Bluetooth paired to each other.
* Functions of 1MORE MUSIC APP may vary with different cellphones or operating systems.
For more details, please contact our customer service.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your
satisfaction. If you would like more details on this product or any of our other products, please visit
us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1MORE will
treat you like one.
Tips
1. Please read this instruction manual carefully and retain for future reference.
2. Please fully charge the battery before rst use.
3. If the headphones have been unused for more than 3 months, we recommend that you charge
them. This will improve battery capacity.
4. Only use charging cables and adapters that are FCC (Federal Communications Commission)
approved.
5. In dry environments, static electricity may numb your ear. This is not related to the quality of the
product.

Safety Information

1. Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above
113 °F (45 °C).
3. Do not use the headphones in a thunderstorm storm. This could prevent the headphones from
working properly, and also increase your chance of being electrically shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Do not use the headphones in traf c. Do not use the headphones any time it would be dangerous
to be unaware of noises around you.
7. Adult supervision is required for children of age 6 and under.
8. If you don't feel comfortable after wearing the headphones, please refer to an aurist for advice on
whether in-ear headphones are suitable for you.
WEEE
Electrical and electronic equipment, parts and batteries marked with this symbol must not be
disposed of with normal household wastage, it must be collected and disposed of separately
to protect the environment.
Your 1MORE retailer will advise you of the correct way of disposal in your country.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, re or the like.
CE
Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares that the radio
equipment type 1MORE ColorBuds True Wireless In-Ear Headphones of ESS6001T is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address:www.1more.com
RF exposure information: The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction. Radiation Exposure
Statement Power is so low that no RF exposure calculation is needed.
Declaration for EU Compliance
Operation Frequency/Max. EIRP: 2400-2483.5MHz, Left ear Max. EIRP is 9.08dBm, Right ear Max.
EIRP is 8.88dBm.
FCC
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types ESS6001T
(FCC ID: 2ASDIESS6001T) has also been tested against this SAR limit.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modi cations or changesto this equipment. Such modi cations or changes could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s).
Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute
interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device has been tested for compliance with IC SAR values at a typical operating near the body.
To ensure that RF exposure levels below the levels tested, use accessories with this equipment to
maintain a minimum separation distance of 0 cm between the body of the user and the device.
These accessories should not contain metallic components. It is possible that the accessories used
close to the body that do not meet these requirements are not consistent with the SAR limits and it
is advisable to avoid using them.
Ce dispositif a été testé pour la conformité avec les valeurs SAR à un fonctionnement typique près
du corps . Pour assurer que les niveaux d'exposition aux radiofréquences en deçà des niveaux testés,
utiliser des accessoires avec cet équipement pour maintenir une distance de séparation minimale de
0 cm entre le corps de l'utilisateur et l'appareil. Ces accessoires ne doivent pas contenir des
composants métalliques . Il est possible que les accessoires utilisés près du corps qui ne répondent
pas à ces exigences ne sont pas compatibles avec les limites SAR et il est conseillé d'éviter de les
utiliser.
Silicone Ear Tip
(XS/S/L)
1MORE Bear Sticker x 1
When headphones are placed in charging
case and LED of charging case ashes 5
times, the case has low battery, please
charge the case rst.