WIMIUS T6 Manual Del Usuario página 16

② Input Source Selection
A. Press the SOURCE button to enter the source selection interface.
B. Press Up (▲)/Down (▼) button to select the input source from
AV, Component, PC-RGB, HDMI and USB.
AV：AV (Video) signal input
Component: Component input
PC-RGB：PC signal input
HDMI：HDMI signal input
USB：Multimedia signal input
C. Press the OK button to con rm the input source.
③ Menu Setting
M
OK
④ Image Flip
A. Refer to "Menu setting" steps to switch to the
PICTURE setting page (as the right picture
shown).
B. Press the Up (▲)/Down (▼) button to select
"Flip Horizon" or "Flip Vertical".
Flip Horizon: Rotate the image from left or right.
Flip Vertical: Rotate the image from up or down.
C. Press the OK button to make the image ip.
A. Press the Menu button on the control panel or remote control
to call up menu page.
B. Press the Left ( )/Right ( ) button on the control panel or
remote control to select the menu you want to set.
C. Press the Up (▲)/Down (▼) button on the control panel or
remote control to select the sub-menu you need to set. Then
the sub-menu of the selected will be highlighted.
D. Then press the OK button on the control panel or remote
control to enter the selected sub-menu (Some options of
sub-menu are also change/con rm by pressing the OK
button).
E. Press the Up (▲)/Down (▼) button on the control panel or
remote control to select parameter values.
F. Repeat the above step B to step E to set the other menu items,
or simply press the "MENU" or "EXIT" button to exit the menu
page.
Picture
12
S
OK
Picture Mode User
Color Temperature
Aspect Ratio
X_Zoom
Y _Zoom
Noise Reduction
PC Setting
Color Range 16-235
Flip Horizon
Flip Vertical