Safety Requirements - Forno FFFFD1933-28RS Manual Del Usuario

Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS

Ensure that component parts shall be replaced with like components and that servicing shall be done
by factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect
parts or improper service.
This appliance is not intended for use by persons (including children) whose physical, sensory or
mental capabilities may be different or reduced, or who lack experience or knowledge, unless such
persons receive supervision or training to operate the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not use extension cords or ungrounded (two prong) adapters.
If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similar qualifi ed person in order to avoid hazard.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
WARNING: Flammable foam blowing agent (Cyclopentane) was used in the insulation. Disposal of
this unit must follow federal and local regulations.
Please make sure that you leave the minimum amount of space between the appliance
and all surrounding walls and vents (see location section). Do not cover any of the ventilation
openings with any material as the appliance needs adequate space to breathe.
SAVE THESE INSTRUCTIONS!
3