ASROCK B660M Pro RS Manual De Instrucciones página 25

Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 23)
RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 26)
Addressable LED Headers
(3-pin ADDR_LED1)
(see p.1, No. 25)
(3-pin ADDR_LED2)
(see p.1, No. 6)
(3-pin ADDR_LED3)
(see p.1, No. 7)
22
Please connect a Thunderbolt™ add-
in card (AIC) to this connector via
the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE3 (default slot).
This RGB LED header is used to con-
nect RGB LED
1
+12V G R B
extension cable which allow
users to choose from various LED
lighting effects.
Caution: Never install the RGB
LED cable in the wrong orientation;
otherwise, the cable may be dam-
aged.
*Please refer to page 32 for
further instructions on this header.
These three headers are used to con-
nect Addressable LED
1
extension cables which allow
GND
users to choose from various LED
DO_ADDR
VOUT
lighting effects.
Caution: Never install the Address-
able LED cable in the wrong orien-
GND
tation; otherwise, the cable may be
DO_ADDR
damaged.
VOUT
*Please refer to page 33 for
1
further instructions on this header.