Tabla de contenido
Using the device
Connecting additional devices
In receiving mode or sending mode, your Level Link can connect to up to two devices via
Bluetooth.
1
In receiving mode or in sending mode, connect your Level Link to the first device.
2
Connect the Level Link to a second device via Bluetooth using the connection method
used for the first device.
• I n receiving mode, if the Level Link does not appear in the detected devices list,
press and hold the Multifunction button for about 3 seconds to enter Bluetooth
pairing mode.
• I n sending mode, the Level Link supports the aptX low-latency codec when it is
connected to one audio device. If two audio devices are simultaneously connected
to the Level Link, the aptX codec is not supported and video and audio output may
not be synchronised.
• I n sending mode, the usage range between the Level Link and other devices may
be reduced.
Reconnecting or disconnecting from other
devices
Reconnecting the devices
When your Level Link is disconnected from the audio device due to the distance between the
devices, bring the devices closer together and press the Multifunction button to pair them
again. Or, you can use the Bluetooth menu on the audio device to pair the devices.
Disconnecting the devices
To disconnect the Level Link from the audio device, turn off your device or unpair the devices.
If you connected the two devices via an audio cable, unplug the cable from both devices.
English(UK)
14
12
Tabla de contenido
