IRTEC smart Manual De Instrucciones página 62

F1
F2
F3
F4
F1
F2
F3
F4
Based on the active operating mode, one of the above pages can be accessed. The machine's work field is
represented schematically in the top part of all pages, the maximum irrigable length is given by the length
of the hose, while the actual trolley position is given by the yellow line near it. At the edges of the field it is
possible to see the length of every single sector relating to the overall length of the field (in green) or to the
position of the trolley (in grey).
The possible operating modes are represented by the following icons (on the F2-F3-F4 keys), the green
tick indicates the operating mode selected:
Which represent:

Rain priority (figure 60): in this mode the operator must enter the desired quantity of water
expressed in mm for each sector, using the selection wheel/button. From this page, using the F6
key, it is necessary to access the final trolley configuration, where the data for a correct rainfall
calculation will have to be set based on the type used.
62
140
142
Rain Mode
Speed Mode
Time Mode
F5 F1
F6 F2
F7
F3
F8 F4
F5
F6
F7
F8
141
20/01/2020
F5
F6
F7
F8
SMART