Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A. TAKING THE DEVICE APART
• Press the Attachment Tabs on either side of the device.
Holding the tabs in, gently pull up on the top case until the
two parts separate.
• Remove the valve cartridge. Do not disassemble any
part of the cartridge.
• To remove the mouthpiece, grip firmly and rotate while
pulling away from the device.
B. CLEANING THE DEVICE
SOAP AND WATER
• Wash the four parts in a solution of lukewarm clean water and liquid dish detergent, allowing the parts to soak for
15 minutes. Agitate gently.
• Rinse in warm water.
• To dry, shake the parts to remove any excess water. Allow parts to air dry thoroughly before you put the parts back
together.
OR DISHWASHER
• The four disassembled parts may be washed in a dishwasher by securing
parts in a basket on the top rack. Wash in a normal wash cycle with
dishwasher detergent ensuring use of rinse aid (eg. Jet Dry
• If excess water remains, shake the parts and allow to air dry thoroughly
before reassembly.
• Dishwashing with overly dirty dishes is not recommended.
C. REASSEMBLING THE DEVICE
• Insert the valve cartridge into the bottom case. If it does not slip easily into
place, rotate 180° and try again.
• Connect the top and bottom cases until you hear both Attachment Tabs "click" (this may occur simultaneously).
Ensure the tabs are engaged by firmly pressing the two halves together.
• Reattach the mouthpiece.
MONTHLY CLEANING
Tap water can be high in minerals which may result in scale build-up on the device. We recommend you soak the
disassembled device in a solution of 1 cup vinegar and 1 cup water for 1 hour, then wash as normal, every month. If you
wash your device daily in tap water, you may need to soak it more often.
2. DISINFECTION INSTRUCTIONS
The Aerobika
®
Oscillating PEP device may be disinfected weekly using any of the following methods. Prior to
disinfection, follow cleaning instructions. Do not dry or reassemble the device.
†
).
5
EN
Tabla de contenido
