Operating Instructions - Young Living Lustre Instrucciones De Operación

Operating Instructions

1. Remove the outer glass cover by holding the base securely and gently
lifting the cover. Remove the inner lid of the diffuser.
2. Make sure that the reservoir is empty of water.
3. Insert the power adapter plug securely into the jack found at the
bottom of the Lustre Diffuser or on the side of the Lucia Diffuser.
4. Set the diffuser on a hard, flat surface.
5. Add water to the reservoir until the level reaches but does not exceed
the water fill line.
6. Add 8–10 drops of essential oil.
7. Place the inner lid back onto the diffuser. Make sure to align the lid
to the reservoir. The lid should sit flush on the reservoir on all sides;
otherwise leaking will occur.
8. Replace the outer glass cover so that it fits securely over the rubber
alignment gasket and sits flush on the base.
9. Plug the power adapter into a power outlet.
10. Press the On/Off button to switch the diffuser on.
11. The diffuser will produce mist, and the LED light will turn on.
6