NEO PROTON IP QW ZOOM Manual De Usuario página 10

600HZ
1200HZ
LED Frequency
2000HZ
4000HZ
25kHZ
Auto Speed
Fan Mode
High Speed
ON
10S
Backlight
20S
30S
ON
Key Lock
OFF
Fixture Hours
Information
Version
UID
YES
Reset factory
NO
White Presets Mode
This function allows you to choose preset white color tem-
peratures.
• Press the button MENU until the display shows Static,
then press ENTER.
• Press the UP/DOWN buttons to select White Preset,
then press ENTER.
• Press the UP/DOWN buttons to scroll to the desired pre-
set, then press ENTER.Four selectable dimming curves:
OFF, dimmer 1,2,3 (fast, medium, slow.)
Auto Show
If no DMX control signal is present at the DMX INPUT, the
unit independently runs through its show programme pro-
vided that the blackout mode is switched off:
• Press the button MENU so many times until the display
shows Auto Show, then press the button ENTER.
P. 10
PROTON IP QW ZOOM
ENGLISH VERSION
All manuals and user guides at all-guides.com
(9999H)
(V1.0)
15D00207****
Default: 1200hz
Default: Auto Speed
Default: ON
Default: ON
• Press the button UP/DOWN to switch between the show
Auto 1 - Auto 5. The unit will operate in show
mode.
• Using the button UP/DOWN to select the desired run
speed slow-fast 0-100.
• Press the button ENTER to save the setting.
IMPORTANT: Programs Auto 1 - 5 are fully pre-pro-
grammed and will not be altered by changes.
Static mode
• The fixture has the ability to accept custom static color
settings. Access these chases via the control panel on the
back of the fixture.
• Press the button MENU so many times until the display
shows Static, then press the button ENTER.
• Select Fixed Color through the buttons UP/DOWN, then
press the button ENTER.